98civicproject
New Member
I purchased a 97' jdm b18c from hmotors and is being rebuilt for my setup. The block is almost done being machined and im close to do the swap.My car is a 98 ex obd2 and the B series is also obd2.What ive done so far is i replaced the D series ecu, and put in the B series p72 ecu. it plugged right in with the old d series harness. now, is this the right way to do this.
-hmotors sent me a harness with the motor, can i replace the D series harness with this.
thx for the help, my first swap guys so wish me luck
jdm b18c
bored 84mm and sleeved
Eagle rods and crank
je pistons 9:1
turbo coming soon
-hmotors sent me a harness with the motor, can i replace the D series harness with this.
thx for the help, my first swap guys so wish me luck
jdm b18c
bored 84mm and sleeved
Eagle rods and crank
je pistons 9:1
turbo coming soon