1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Crx + B18a1 and a radiator

Discussion in 'HYBRID -> ED-EF / DA' started by LsB16CrxHF, Apr 12, 2005.

  1. LsB16CrxHF

    LsB16CrxHF Senior Member

    Messages:
    167
    Likes Received:
    0
    Joined:
    Aug 16, 2004
    Location:
    Massachusetts
    is ther a way to fit a sohc radiator that came from a 93 civic hatch in my bay and hook it up to the motor.....the radiator looks too tall...
     
  2. racintweek

    racintweek Senior Member

    Messages:
    743
    Likes Received:
    0
    Joined:
    Mar 13, 2004
    Location:
    Arlington VA
    you can use your stock rad, its a tight fit with my 4-2-1 header but it has about 1/3" of room between it and the fan.
    if you dont have A/C you can move your coolant fan to the passenger side for more clearance

    to fit the EG 1/2 rad, you need to make new brackets so you can lean it in towards the engine
     
  3. ripperbone

    ripperbone angry bear

    Messages:
    3,173
    Likes Received:
    8
    Joined:
    Oct 20, 2004
    Location:
    Oklahoma
    :withstupid:
    if you plan on putting a turbo on your car do the radiator swap.
    if your going all motor stick with your stock radiator
     
  4. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    Id say just got with a del Sol VTEC Radiator.

    Brian
     
Verification:
Draft saved Draft deleted

Share This Page