please help me. i dont know how else to fix this. i swapped a b16a to my crx and found out that injectors 2 and 3 are dumping fuel on the cylinder non stop, drowning it after. the car starts but its rough.
took apart the head and intake manifold and started playing around with the fuel injector wiring. after switching and playing around with the wiring, now i got all fuel injectors spraying at the same time while turning the distributor...
i know its some wiring issue that i have to deal with. i checked the correct wiring order on the injectors and everything is right.
if this is a big wiring issue, how would i go ahead and bypass the stock fuel injector wiring and just go ahead and put new wires? where should i run the wires from the ecu?. any help here would be greatly appreciated.
p.s. its not an ecu problem because i already tried 3 different ecus and still did the same thing. also, it has stock fuel injectors
took apart the head and intake manifold and started playing around with the fuel injector wiring. after switching and playing around with the wiring, now i got all fuel injectors spraying at the same time while turning the distributor...
i know its some wiring issue that i have to deal with. i checked the correct wiring order on the injectors and everything is right.
if this is a big wiring issue, how would i go ahead and bypass the stock fuel injector wiring and just go ahead and put new wires? where should i run the wires from the ecu?. any help here would be greatly appreciated.
p.s. its not an ecu problem because i already tried 3 different ecus and still did the same thing. also, it has stock fuel injectors