1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

D16y8 Vtec Head Build, Questions About Upgraded Valvetrain!!

Discussion in 'Civic - EP, FA, FG' started by 89' Project Civic, May 17, 2009.

  1. 89' Project Civic

    89' Project Civic d16a6/d16y8 "mini-me"

    Messages:
    736
    Likes Received:
    6
    Joined:
    Mar 3, 2007
    Location:
    St. Catharines, Ontario, Canada
    Hey guys, I have a D16y8 head that I'm mating to a D16a6 (non-vtec) block and putting in my EF (88-91' Civic) chassis. I got talking with the guys doing mini-me swaps and they suggested putting a "Stage 2" camshaft in with just stiffer valve springs. I do not know which stiffer valve springs I should put in, does this depend on the camshaft I use?. I was thinking of using Skunk2 stiffer springs, but I hear Skunk2 does not make the best valvetrain for this engine. Any guidance will be much appreciated!. Thanks!.
     
  2. 89' Project Civic

    89' Project Civic d16a6/d16y8 "mini-me"

    Messages:
    736
    Likes Received:
    6
    Joined:
    Mar 3, 2007
    Location:
    St. Catharines, Ontario, Canada
    bump
     
Verification:
Draft saved Draft deleted

Share This Page