1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

d16z6 running a p08 ecu

Discussion in 'Civic and del Sol - EG and EK' started by sideshowbob, Apr 16, 2012.

  1. sideshowbob

    sideshowbob New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Oct 21, 2011
    Just wondering if this is ok or if I should use a p28 as its the proper ecu for the engine
     
  2. |Chaz|

    |Chaz| Well-Known Member VIP

    Messages:
    6,125
    Likes Received:
    253
    Joined:
    Jul 4, 2007
    Location:
    Washington
    Pretty sure p28 is the proper ecu for a D16z6. p08 is the ecu for a D15b.
     
  3. AHHVTEC

    AHHVTEC Well-Known Member VIP

    Messages:
    13,122
    Likes Received:
    245
    Joined:
    Oct 13, 2006
    Location:
    Alabama
    both will work, but if you use the p08 you will need to run a 1 wire o2 sensor. if it was me id just run the p28 as it is the correct ecu as chaz has stated
     
  4. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,020
    Likes Received:
    3,951
    Joined:
    Sep 28, 2002
    Location:
    CT
    :concur:

    p28s are cheap and plentiful
    get the right ECU
     
  5. sideshowbob

    sideshowbob New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Oct 21, 2011
    Yeah the p08 is for a d15b that's what I had in the car but the was using a bit oil so a friend gave me the d16z6 which uses no oil but atm I don't have a p28. Was only really wondering if this could cause any kind of damage to the engine, I thought it would be fine but was told from someone that the fuel map could be different and cause problems? To me both engines seem the same apart from the obvious being the block, same injectors and all
     
Verification:
Draft saved Draft deleted

Share This Page