k_rosenthal
New Member
Just swapped in a z6 into my 94 cx hatch. Starts fine, runs ok at idle, wont rev past 3k rpms. Timing is correct, Map sensor is good, TPS sensor is good, New distributor, New o2 sensor, p28 ecu is good. fuel pump is good along with the filter. new spark plugs. Engine harness off an 95 ex civic.
Only cel code i am getting is code 4 (crank angle sensor)
Drop test on injectors showed 4&3 have 14 psi drop 2 has 13 psi and 1 has 11.
Looking for any help at all, this thing is stumping me badly.. could the injectors be causing this.. and how can i check or fix the code 4 problem.. thanks
Only cel code i am getting is code 4 (crank angle sensor)
Drop test on injectors showed 4&3 have 14 psi drop 2 has 13 psi and 1 has 11.
Looking for any help at all, this thing is stumping me badly.. could the injectors be causing this.. and how can i check or fix the code 4 problem.. thanks