We may earn a small commission from affiliate links and paid advertisements. Terms
NEW THOUGHT
a h22 with 235 pounds sounds more than likely that its gotta be either really low low mileage or its an OBD2
do you know what year car it came from?
where it came from?
JDM? importer? junkyard?
I got the motor from enginesrus a jdm importer in Cali Its supposed to be for my year model 92-96 Im not completely shure where the liquid is coming from only that its bubling out of cylinder#1
there could be some problem with those injectors I had to splice together two of the sensors that attach to each injector but if that was messed up wouldnt it not be getting any fuel?
gsrcrxsi -GFU-
if the motor is a real jdm then it should be 92-96 obd 1
Originally posted by reckedracing@Nov 19 2004, 04:52 PM
[
uhm... fucking with wires to injectors is never really a good idea unless you are positive what you are doing...
and they could either not dump fuel, dump the right amount, or dump too much...
those are your options... lol
Well the wires had been cut and all i did was put red wire to red wire. I didnt think there would be any problems. The wire gives a signal to the sensor ontop the injector, right???? If thats wrong and you guys know a better or right way to do it let me know.
this is what im going to do:
1 get new plugs (ones with lots of spark)
2 check injector wiring
3 check all sensors and grounds
So if these dont work what would you guys suggest.
but your motor has REAL high compression for a 92-96 ESPECIALLY considering the usual lack of maintenance that jdm motors get...
[post=419387]Quoted post[/post]
all cylinders compresed at 235 even #1