1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dead Gauges

Discussion in 'ECU's, Electronics, and Tuning' started by slammedcivic, Apr 7, 2006.

  1. slammedcivic

    slammedcivic Member

    Messages:
    53
    Likes Received:
    0
    Joined:
    Jun 19, 2004
    I checked all the fuses, swapped in a new ecu and my gauges still dont work! My CEL doesnt even come on. What could be the problem? faulty ground? but the only ground connections i know of are the one that connect to the transmission and the one that connects to the top of the engine head by the drives side headlight. any help would greatly be appreciated since this car is my daily driver.. this problem started after I replaced the clutch..
     
  2. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    The ground on the thermostat housing and recheck the ground to the tranny.
     
Verification:
Draft saved Draft deleted

Share This Page