1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

distributer

Discussion in 'HYBRID -> EG-EK / DC' started by gdhracing, Sep 1, 2009.

  1. gdhracing

    gdhracing New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Aug 31, 2009
    i have a ek hatch and just dropped a 97 b18c1 in it i have a harness and ecu for the exact motor both being obd2. but the distributer has 2 plugs and the harness only has one??? i know password sells a jumper harness for this but is there anywayv to rig this up i have plenty of harnesses to get sensors off of if anyone has any info please post
     
  2. 97h22dxcoupe

    97h22dxcoupe senior member

    Messages:
    332
    Likes Received:
    4
    Joined:
    Mar 29, 2009
    Location:
    Coffeyville, ks.
    yeah,google a diagram and match up dizzy wires to existing wires on your dizzy or you can just buy the jumper for it..
     
  3. h22aEH2

    h22aEH2 New Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Aug 22, 2009
    Location:
    mechanicsburg, pa
    get the matching plugs to the dizzy then go find a diagram online somewhere that shows wire color and pinout so you hook it up correctly, i had to do this for my friends 2000 civic LS swap... hope this helps, need any more just ask...
     
Verification:
Draft saved Draft deleted

Share This Page