So I just did my ls swap in my crx dx. I changed it over to dpfi to mpfi, read all of the instructions. My car will crank over, but wont start. When I put the key in and leave it on the on position, the main 12v relay by the fuses starts to buzz. What does this mean? That my relay is bad and thats why my car wont start? Please help thanks
done with ls swap, but main 12v relay clicks and car wont start
- Thread starter auditt225
- Start date
- Replies 1
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
Crimson_jay
New Member
Check to see if your Dizzy is getting HOT...If so then you are missing a ground wire which could possibly account for the "click" sound you hear. Check your wires because TOO much current to the Dizzy can ruin it.
Also use a test light to check for continuity between fuses on the main fuse box.
Also use a test light to check for continuity between fuses on the main fuse box.