Discussion in 'Civic and CRX - EW' started by jeyjeysir, Nov 7, 2009.
2 hours doing this work for the people who need aid, I am of Puerto Rico, but alive in Atlanta and can help in which it can thanks
explaining photos again in a new simple
Here is another example simple and easy
from the now empty c1 run a blue/green wire into the engine bay
from the now empty c2 run a blue/yellow wire into the engine bay
I went ahead and merged these two threads...
on the last write up it shows c3 and c4 have to be run ..
i havnt seen that on any other writeup can some one explain this to me?
that last picture has a lot of mistakes - don't use it
c1 and c2 do not move
just cut it and put the b10 will b2 that is orange and the green wire to b12 and b11 black after they have since cut it and will put in the c1 and c2 in b10 to b12 cables coming from the harness and the wires cut into c1 and c2 such Distribuitor go to ok? Anything I explain it better to forgive
i have pictures
i have more ok sorry friends is easy for real
Separate names with a comma.