1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dual valve springs or not?

Discussion in 'Engine Building' started by Dannyum89, Nov 28, 2008.

  1. Dannyum89

    Dannyum89 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 28, 2008
    Location:
    Hollywood
    Hey guys. Im brand new to this forum but not new to forums so please dont treat me like a newbie. I recently bought a 92 civic hatch from a friend of a friend. Gas prices were too high for my T/A. From what I gather it has a B18c1 with a 00 Si tranny. Its got a whole bunch of other bells and whistles but for the most part this could be called a GSR swap rite? Anyways my question is the head has the stampings 99 PR3-3. I did some homework and found out this is a B16 head and could be aTypeR head correct? I read that if it was a TypeR it would have dual valve springs. Problem is I cant see in there. I see the springs but cant see if theres another smaller one in the middle there. I dont see the green mark either. Can you tell by the cams without a micrometer? Any help would be appreciated.
     
Verification:
Draft saved Draft deleted

Share This Page