1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dx to sir

Discussion in 'ECU's, Electronics, and Tuning' started by vdubber, Aug 23, 2003.

  1. vdubber

    vdubber Member

    Messages:
    48
    Likes Received:
    0
    Joined:
    Apr 4, 2003
    when i tried putting the stock dx harness , unmodified, on the b16a1 engine, we ran into a slight problem. we cannot hook up the sensors on the rear of the engine while we have like the o2 sensors hooked up on the front. there just isnt enough slack.do i just have to reposition the dx harness or do i have to lengthen wires. as soon as i can get the dx harness on then i can do the rest of the wiring once i know how it is supposed to go. i only ask this because we couldnt get the harness positioned properly and the sir harness looks like twice as long.
     
  2. HardLowrdRanger

    HardLowrdRanger Member

    Messages:
    99
    Likes Received:
    0
    Joined:
    Nov 18, 2002
    Location:
    Phoenix, AZ
    You're putting an unmodified Dual Point Fuel Injection harness from a DX on a b16a1? =)
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
Verification:
Draft saved Draft deleted

Share This Page