1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

EF rear disc issue.

Discussion in 'Wheels / Suspension / Tires / Brakes' started by red91efhatch, Feb 8, 2009.

  1. red91efhatch

    red91efhatch New Member

    Messages:
    267
    Likes Received:
    2
    Joined:
    Jul 17, 2008
    Location:
    Albuquerque
    First, I searched and I didn't find a similar issue to help me resolve mine... with that out of the way I finished the rear disk conversion on my EF. I used DA rear everything, DA 40/40 prop valve. now I've got everything bled and unfortunately I took it for a ride and my brakes are near the floor (again I did bleed the brakes) however, when I parked the car after a test drive I pumped the brakes and the pedal actually comes up, it's still lower then before I did the conversion but it's firm and not spongy? any ideas what might be going on?
     
  2. K2e2vin

    K2e2vin Senior Member

    Messages:
    8,446
    Likes Received:
    92
    Joined:
    Jan 2, 2003
    Location:
    Raleigh, NC
    Did you bleed the farthest from the MC caliper first?
     
  3. red91efhatch

    red91efhatch New Member

    Messages:
    267
    Likes Received:
    2
    Joined:
    Jul 17, 2008
    Location:
    Albuquerque
    Forgot to mention that, yes. RR,LR,RF,LF is the order they were bled.
     
Verification:
Draft saved Draft deleted

Share This Page