1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

EG Chassis identical to G3 Integra

Discussion in 'Wheels / Suspension / Tires / Brakes' started by YangpaNemsay, Nov 8, 2004.

  1. YangpaNemsay

    YangpaNemsay Senior Member

    Messages:
    682
    Likes Received:
    0
    Joined:
    Nov 12, 2002
    Location:
    Okinawa, Japan
    I read that the EG Civic is identical to the 3rd-Generation Acura Integra (1994-2001). Is this true?

    If this is, what suspension components from an Acura Integra would fit into an EG Chassis, i.e. aftermarket coilovers, suspension pieces.
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,965
    Joined:
    Sep 28, 2002
    Location:
    CT
    not identical
    very similar

    anywho, as far as suspension shit goes (springs, shocks, full coilovers, etc) you can run any 3rd gen integra shit except for the ITR stuff (to run the ITR stuff you need to switch to the ITR LCAs)

    for the bars and shit im not 100% sure
     
  3. YangpaNemsay

    YangpaNemsay Senior Member

    Messages:
    682
    Likes Received:
    0
    Joined:
    Nov 12, 2002
    Location:
    Okinawa, Japan


    Holy Shiznits! You mean if I can't find a certain coilover for the eg Civic, I can use the one that was made for the 3rd gen teg?
     
  4. UDT

    UDT Senior Member

    Messages:
    2,015
    Likes Received:
    0
    Joined:
    Sep 24, 2003
    Location:
    california


    Correctamundo
     
  5. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,965
    Joined:
    Sep 28, 2002
    Location:
    CT
    the spring rates might be higher (designed for the heavier integra) resulting in a stiffer ride
    but yes the stuff will fit
     
  6. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    all strut bars will fit in the front.

    not sure on the back...
    reay sways, with the right lca's/mounts
    front sways are swapabale
     
Verification:
Draft saved Draft deleted

Share This Page