1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Engine Build Up DOHC ZC

Discussion in 'HYBRID -> ED-EF / DA' started by 87zc1crx, Oct 23, 2004.

  1. 87zc1crx

    87zc1crx Junior Member

    Likes Received:
    Apr 20, 2004

    First let me say thanks for this forum as this is my first post.
    Hello everybody!

    Well, my problem is: i have a zc-1 block, a d16a9 head, zc-1 pistons and rods, zc-1 cams, zc-1 gearbox and a d16 sohc crank.
    I also have 2 adjs cam gears for the sohc zc.
    So i counted the tooth on the crank pollie and it´s 19.
    On the cam gears each has 38 tooth.
    Can i make this engine work with this?

    My car is a 87 crx that had a stock zc-1, now has a d16a8 n/a and i hope in the future to swap in this engine i´m building with a turbo.

    Help much apritiated.

Draft saved Draft deleted

Share This Page