1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

finishing touches on my build

Discussion in 'HYBRID -> EG-EK / DC' started by marshall12395, Dec 4, 2012.

  1. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    hey guys got a few questions for you about my build il list my build after.what computer should be running, a buddy at a tuning is gonna send me a chiped p28 and upload a type R basemap and a Skunk2 obd2-obd1 jumper harness, is that any good for what im doing.heres my build
    skunk 2 tuner series stage 2 cams
    super tec valve train
    68mm throttle body with skunk 2 intake manifold
    aem cold air intake
    not sure grams or rc 440cc or 550cc injectors
    walbro 255 fuel pump
    421 headers
    2.5 exhaust
    stock bottem stock pistons
    my engine is itr b18c type r in a 1999 coupe. its just my car for having fun on the streets. is there anything else i should be doing to the car.
    my build is not finished im still waiting on parts
     
    Last edited: Dec 4, 2012
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,024
    Likes Received:
    3,951
    Joined:
    Sep 28, 2002
    Location:
    CT
    the basemap should be fine for driving it at low speed directly to the dyno to get a proper tune on that ECU
     
  3. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    ok but im not driving lol its going on a trailer.is there anthor computer i can buy that will give me or hp
     
  4. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
    A chipped ECU with a tune done in-car for your exact build will net the most HP.
     
  5. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    so just my computer with a good tune
     
  6. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
  7. porkfried83

    porkfried83 New Member

    Messages:
    93
    Likes Received:
    1
    Joined:
    Mar 11, 2011
    Location:
    ME
    isn't the skunk 2 intake manifold a copy of the type r's?
     
  8. porkfried83

    porkfried83 New Member

    Messages:
    93
    Likes Received:
    1
    Joined:
    Mar 11, 2011
    Location:
    ME
    never mind that last post, brain fart
     
Verification:
Draft saved Draft deleted

Share This Page