1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

fried?

Discussion in 'ECU's, Electronics, and Tuning' started by INJEN78, Feb 14, 2009.

  1. INJEN78

    INJEN78 HS LEGEND

    Messages:
    9,187
    Likes Received:
    121
    Joined:
    Oct 1, 2007
    Location:
    OHIO
    just got my 91 crx si running good,its an obd0 b18a1,but when i start it up it idles at 2 grand and slowl drops to 800(thats fine)
    but thats on a pm6,now,when i run the pr4 it revs to 2500 then slowly drops to 1000 and then when it hits 1000 it jumps to 1500 then to 800 back up,back down,etc.
    so is my ecu fried?

    idles perfect with the pm6,but surges with the pr4??
    i was going to chip the pr4,but if its junk,theres no point
     
  2. efhondakid

    efhondakid My name is Byron. VIP

    Messages:
    7,034
    Likes Received:
    202
    Joined:
    Mar 2, 2007
    Location:
    Akron-Canton, Ohio
    Colant level good? Unplug the IACV and see if that fixes the surge.
     
  3. INJEN78

    INJEN78 HS LEGEND

    Messages:
    9,187
    Likes Received:
    121
    Joined:
    Oct 1, 2007
    Location:
    OHIO
    yep coolant is fin,it only does it with the pr4 though.
    im gonna bleed it 2mrrw,and check the iacv
     
Verification:
Draft saved Draft deleted

Share This Page