EGProject
YEEEEAAHHHHH
Had a for sale thread up a while ago and figured I'd post up a new one with new parts. Pictures are available upon request.
Ractive 3" Short-ram Tube Polished aluminum, has breather bung. No clamps or couplers.
$6
92-95 Civic EX/Integra knuckles, rotors, calipers Knuckles are in good shape, rotors are kinda rough. One of the balljoints is hallway pushed out. Bearings are still good. Calipers appear fine. Comes with drivers side CV axle.
$40
13" Honda Steelies 4x100 - 4 13" steelies with one brand new Firestone tire, and 3 pretty beat no-namers. Pick up only...
$Free
02-06 Sentra SE-R Eibach Sportlines - Pretty much brand new. On car for 3 months, taken off when car was traded in. $250 brand new.
$110 + shipping
92-95 OBD1 M/T P06 ECU - Taken out of my own running DX Coupe. Runs fine. Virgin ECU. Great for chipping or VTEC conversion.
$40
Garret T-28 Volvo Turbo - Smallish Internal wastegate turbo.Internal wastegate housing can be removed, has 5-bolt flange. Needs a rebuild, blades are intact. The housings have been cleaned, degreased and beadblasted. A rebuilt kit away from a great D-series turbo.
$50
OEM GSR/Si Front Strut Bar - Good condition, comes with zinc plated metric hardware. Direct bolt on for some Civics/DC2 Integras. Some cars may require drilling of holes. Bar is black in color.
$30
GSR/LS Front Calipers - No pads, cleaned up to bare metal with no leaks or major problems. Comes with brackets and sliders. Direct replacement for EX/Si Civics 92-95, LS/GS/GSR Integras 94-00.
$30
GSR/LS Left Side Spindle - Balljoint, upper joint bearing and dust sheild. Good condition.
$15 + Shipping
D16Z6/Y8 Valve Cover - Sand blasted,glass beaded - bare metal. Good condition has "Honda" on it. No VTEC logo.
$25
Civic/Integra Magnaflow Test Pipe - Used, but still in good condition. Has rotatable flanges for use with Type-R headers. Solid construction, no O2 bung.
$25
Preferred payment is Paypal, or cash in person. Trades considered. I have numerous vouches from this forum, and I have 32 100% Ebay transactions.
Ractive 3" Short-ram Tube Polished aluminum, has breather bung. No clamps or couplers.
$6
92-95 Civic EX/Integra knuckles, rotors, calipers Knuckles are in good shape, rotors are kinda rough. One of the balljoints is hallway pushed out. Bearings are still good. Calipers appear fine. Comes with drivers side CV axle.
$40
13" Honda Steelies 4x100 - 4 13" steelies with one brand new Firestone tire, and 3 pretty beat no-namers. Pick up only...
$Free
02-06 Sentra SE-R Eibach Sportlines - Pretty much brand new. On car for 3 months, taken off when car was traded in. $250 brand new.
$110 + shipping
92-95 OBD1 M/T P06 ECU - Taken out of my own running DX Coupe. Runs fine. Virgin ECU. Great for chipping or VTEC conversion.
$40
Garret T-28 Volvo Turbo - Smallish Internal wastegate turbo.Internal wastegate housing can be removed, has 5-bolt flange. Needs a rebuild, blades are intact. The housings have been cleaned, degreased and beadblasted. A rebuilt kit away from a great D-series turbo.
$50
OEM GSR/Si Front Strut Bar - Good condition, comes with zinc plated metric hardware. Direct bolt on for some Civics/DC2 Integras. Some cars may require drilling of holes. Bar is black in color.
$30
GSR/LS Front Calipers - No pads, cleaned up to bare metal with no leaks or major problems. Comes with brackets and sliders. Direct replacement for EX/Si Civics 92-95, LS/GS/GSR Integras 94-00.
$30
GSR/LS Left Side Spindle - Balljoint, upper joint bearing and dust sheild. Good condition.
$15 + Shipping
D16Z6/Y8 Valve Cover - Sand blasted,glass beaded - bare metal. Good condition has "Honda" on it. No VTEC logo.
$25
Civic/Integra Magnaflow Test Pipe - Used, but still in good condition. Has rotatable flanges for use with Type-R headers. Solid construction, no O2 bung.
$25
Preferred payment is Paypal, or cash in person. Trades considered. I have numerous vouches from this forum, and I have 32 100% Ebay transactions.
Last edited:
