FS JRSC Complete for GSR + Endyn Stepper Pulley 9psi

We may earn a small commission from affiliate links and paid advertisements. Terms

G

graphixdezign6

Junior Member
FS JRSC Complete for GSR + 3.8 Nose Pulley 7psi

Supercharger is sold, Exhaust is still avail



I also have a full Aluminized 2.5" exhaust with 18" Magnaflow resonator
2.5" cat and Magnaflow muffler.
Again i purchased this used and never got a chance to install.
I painted the entire thing black except the muffler to protect from corrosion.

I want to get at least $300 for this plus about $50 for shipping.
It will have to be sent through Greyhound because it's
just too large to send UPS.
OLD
 
Last edited:
$1350 shipped, regardless of shipping costs.

It will add about 75hp of linear gradual power.
 
Yes it is. Except for 1 gasket which can be made no problem.
If you want i can probably buy the gasket material and make it for you,
or you could just use that gasket in a tube stuff.

I have to go out so if i dont respond thats why, I should be back in about 11pm.

Chris
 
also, just wanted to add that the kit wll be shipped in 2 separate boxes
that way the blower can be packaged better and nothing will get damaged.
 
No i am sorry, the 9psi pulley is no longer available.
That was sold to another member seperately.

However this kit is still upgraded from the stock JRSC kit with the
3.8 Nose Pulley that gives you 7psi over stock 5psi
 
You must log in or register to reply here.
Back
Top