FS: NEW KYB GR-2s & Ground Control Coilovers 88-91

We may earn a small commission from affiliate links and paid advertisements. Terms

D

D See 2

Senior Member
SOLD!

I have for sale a very nice suspension setup.
I dont even have to tell you that GC coilovers are the best in the business.
I was going to use this setup on my 90 hatch, but I have decided to sell the car.
The shocks and the springs are brand new. Never Used.
Will fit all 88-91 Honda civic's and crx's.
This is a very nice setup, I'm sure you'll be overly satisfied with the results.
This package comes with all o-rings, stickers, poly sleeves, nuts, brackets, instructions etc.
The only thing that is missing is the locking wrench.
I believe the skunk2 ones will work. But you really dont even need them.
PayPal only.

Price of $420 FIRM includes:
-Cost of Shipping
-Superior Packaging/Supplies
-Insurance
-Tracking Number
-Paypal Fee

All items will ship within 24 hours of payment receipt.
AIM: FORCEinductedED6
honda-tech vouch thread
Vouchers in sig...
Vouch Thread in sig...
100% positive eBay feedback link in sig...
 
Here are the # from the front two:
91760
GC180.64.61

Here's the rear #'s:
103574
GC180.64.44

Hope this helps :)
 
Not really. :)

Aren't the springs stamped with the spring rates?
 
son of a moneky whore!! thats the same set-up i want on my 90 Integra. shit, i wish i had the money because i need a new suspension some kinda bad. :(
 
theyre not on eBay,
my reference to eBay was only to show that I have 100% positive feedback.
the link is in my sig on honda-tech.
as far as the spring rates go, i'll check again tomorrow.
I may have been high earlier. lol. j/k
 
Damn. I only have 300. Grrr....

Everything I wanted too!
 
Originally posted by pheonixb16aguy@Oct 19 2004, 10:46 PM
how much without the coilovers .. you told me once before buti cant remeber
[post=405011]Quoted post[/post]​
Click to expand...


I'd really really prefer to sell this setup as a package.
 
Nice price $420...................its time.
 
since mike was asking about spring rates i deciphered it for everyone.

the first number is the spring height in mm. 180mm ~ 7"
the second number is the spring diameter in mm. 64mm ~ 2.5"
the third number is the spring rate in kg/mm. so 44= 4.4kg/mm

44 ~ 250 lb/in and 61 ~ 350 lb/in. actual numbers are 245 and 340. i rounded cause these are the numbers ground control would tell you.

so the spring rates are 350f/250r.
 
You must log in or register to reply here.
Back
Top