Ok i determined i had a problem with my h22 jdm injectors and removed them and put in my h23. Im pretty sure the h23 are lower volume then h22. so i am curious if i should buy stock h22 injectors off ebay or to buy the venom python injectors witht he 10% increase in flow. current setup is h22a, intake, header, a true spoon ECU not just chipped. i know the ecu maybe a problem but hey its what came with the motor. and no imediate future plans in upgrades since i just dumped 2k into this car.
problem right now is when i lay onto the throttle it chugs... im asuming not enough fuel going into the cylinders... anyways any other suggestions would be apreciated.
I may do a full fuel system upgrade high flow filter, high flow rail, pressure reg and injectors... and do the pump later on when i start needing the flow rates of higher hp.
oh and the car sat for a year before doing the swap so i think my fuel filter is clogged up anyways from sitting. but yah
thanks
problem right now is when i lay onto the throttle it chugs... im asuming not enough fuel going into the cylinders... anyways any other suggestions would be apreciated.
I may do a full fuel system upgrade high flow filter, high flow rail, pressure reg and injectors... and do the pump later on when i start needing the flow rates of higher hp.
oh and the car sat for a year before doing the swap so i think my fuel filter is clogged up anyways from sitting. but yah
thanks