1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fuel Lines

Discussion in 'HYBRID -> BA-BB /CA-CD' started by ludenewbie, Jun 7, 2003.

  1. ludenewbie

    ludenewbie Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jun 7, 2003
    I recently purchased a Prelude Si, but a few weeks after the purchase it threw a rod, after some research on this site, I purchased an H22A(jdm) and a p13 ECU, thinking to use my H23 tranny, i think i know how to do the wiring, wire the 2 vtec wires and then switch the a6 and a11 pins, but the fuel lines come in on different sides, have I made a mistake in thinking i could swap these easily, or is there a difference between jdm and usdm?
     
  2. ludenewbie

    ludenewbie Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jun 7, 2003
    sorry, the ECU was also a JDM, hence the switching of the pins.
     
  3. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    No, you'll be fine with the fuel line.
     
Verification:
Draft saved Draft deleted

Share This Page