turbozcteg
Junior Member
i have a 96 ls engine with 92-93 cable tranny
PARTS LIST:
stage 2 custom ground camsw/fidanza adjustible cam gears
p&p head
port matched intake to head
shaved head for higher comp
new oem valves, seals, retaniers and springs
brand new gaskets all around
ngk iridum_r plugs
taylor 8.5 mm wires
b16 a1 dizzy with msd coil
pr4 rods with arias pistons with high comp rings
brand new rod and main bearings
brand new oem oil pump
brand new water pump
brand new timing belt
rebuilt alt with new belt
new oil pan gasket and
type r flywheel with act 6 puck clutch and 2600lb pressuer plate
92-93 cabel tranny
and pr4 ecu
* im asking $$$1500.00 obo for everything motor tranny ecu and bseries axles
engine has 43 miles on it after break in period was built for nitrous but never put on the engine
** im selling due to bitching girlfriend, and the fact that shes pregnant, so its gotta go. I can provide pictures of the engine and tranny if requested
***best way to contact me is 360 633 5351 day or night. If no answer leave a msg and i will get back to you
my email is turbozcteg@yahoo.com
****also i can transport engine if needed if not too far
perferably to the western washington region
engine located in kitsap county washington
thank you for looking and have a nice day ~jake
PARTS LIST:
stage 2 custom ground camsw/fidanza adjustible cam gears
p&p head
port matched intake to head
shaved head for higher comp
new oem valves, seals, retaniers and springs
brand new gaskets all around
ngk iridum_r plugs
taylor 8.5 mm wires
b16 a1 dizzy with msd coil
pr4 rods with arias pistons with high comp rings
brand new rod and main bearings
brand new oem oil pump
brand new water pump
brand new timing belt
rebuilt alt with new belt
new oil pan gasket and
type r flywheel with act 6 puck clutch and 2600lb pressuer plate
92-93 cabel tranny
and pr4 ecu
* im asking $$$1500.00 obo for everything motor tranny ecu and bseries axles
engine has 43 miles on it after break in period was built for nitrous but never put on the engine
** im selling due to bitching girlfriend, and the fact that shes pregnant, so its gotta go. I can provide pictures of the engine and tranny if requested
***best way to contact me is 360 633 5351 day or night. If no answer leave a msg and i will get back to you
my email is turbozcteg@yahoo.com
****also i can transport engine if needed if not too far
perferably to the western washington region
engine located in kitsap county washington
thank you for looking and have a nice day ~jake