1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

gsr cams and 450cc injectors

Discussion in 'Engine Building' started by Yurik, Nov 15, 2006.

  1. Yurik

    Yurik New Member

    Messages:
    188
    Likes Received:
    1
    Joined:
    Oct 12, 2006
    i have two questions for u guys, i have a 91 crx hatch with a jdm b16a, and a gsr motor, b18c i believe, i was considering throwing the cams out of this into my b16 until i have enough money for my skunk2 stuff, also wondering if i took the 450cc injectors out of our talon and put them into my b16 if that would help, or make me run too rich, thanks
     
  2. formby

    formby learning in progress

    Messages:
    5,735
    Likes Received:
    23
    Joined:
    Feb 19, 2003
    the cams would be ok.

    you dont need the injectors. if you want to use them youll need an EMS
     
  3. MikeBergy

    MikeBergy Blah blah blah....

    Messages:
    3,646
    Likes Received:
    1
    Joined:
    Oct 9, 2003
    Location:
    Central Coast, CALI
    if you are going to go with the cams get a p28 from xenocron with a chip tuned for 450cc injectors. If you already have the injectors, and don't need them, sell them to me :)
     
  4. Yurik

    Yurik New Member

    Messages:
    188
    Likes Received:
    1
    Joined:
    Oct 12, 2006
    they are out of our plymouth lazer with a 2.0 mitsubishi motor, they are free for me so i figured if it would help then id get them, but i think it probably is a little much

    formby i will give you a call this weekend, im jus so busy i have no time, should be saturday some time

    thanks guys
     
Verification:
Draft saved Draft deleted

Share This Page