H22a Secondary butterflies

We may earn a small commission from affiliate links and paid advertisements. Terms

S

slopoke

Member
My H22a is going in tomorrow but after reading all my wiring info I have run into a conflict on wiring the air bypass. One page of my notes said A14 and the other from a different site said A17. This is going into my 92 CX hatch. I have the whole 93 Prelude VTEC with a new JDM H22a and anice pine tree in the door. I want to wire this tomorrow but all I find conflicts what I have already researched. :worthy:
 
(from hondatech.com)

- Sensor voltage to the A25 pinout (or splice into the Yel/Blk wire connector at the driver shock tower harness.
- ECU Signal leading to A17 pinout on ECU
 
Thanks. Also I have the hasport kit and going to use A/C but will the Ludes compressor work or will I have to use the civics?
 
Originally posted by H22AdelSol@Apr 12 2004, 08:41 PM
(from hondatech.com)

- Sensor voltage to the A25 pinout (or splice into the Yel/Blk wire connector at the driver shock tower harness.
- ECU Signal leading to A17 pinout on ECU
Click to expand...

that is the info I was sticking with until I ran across h22acivic.com and came across the other pin
 
You must log in or register to reply here.
Back
Top