1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22A

Discussion in 'HYBRID -> BA-BB /CA-CD' started by deadludeSI, Aug 6, 2003.

  1. deadludeSI

    deadludeSI Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 6, 2003
    Alright, I need some help from someone who has actually done this swap. I am putting a 1994 H22A into my 1993 Prelude SI, according to other people on this forum, this swap is supposed to be easy, but it isnt. The fuel line comes in on different sides, because of the difference between JDM and USDM, the same with the wiring harness. But i have worked through all of that and now i need help with the exhaust, my header does not match up with my Cat. I need a way around this. Thanks
     
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Which header did you use? What's the problem? Is it too long or too short.

    The swap IS easy compared to others out there. The fuel line and wiring issues are pretty minimal when you look at other types of swaps.
     
  3. deadludeSI

    deadludeSI Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 6, 2003
    I used my H22A header and the flange doest line up with the exhaust system.
     
Verification:
Draft saved Draft deleted

Share This Page