greenhotrod
Junior Member
i have a h23 in my crx runs great. Just wondering about swapping a h22 vtec head onto it I found a h22 motor & wiring for about $600 also if I do this should I use the h23 tranny or the h22 trans
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by boostdlude@Feb 25 2003, 08:05 PM
both trannys are the same. so pick one.
I just bought a H22A head from a friend of mine yesterday and i intend to do the head swap really soon. But so far the posts that i have read on this thread are correct about the oil plugs, the gasket and the h23 tranny. Though one thing was left out. If you're going to do the swap, you're going to need to use the p13 ecu or chip the p14 for vtec to engage properly. A friend of mine did the head swap a few years back with the automatic tranny, boosted it and used a b&m quick shifter and ripped everyone apart til he wrecked it. I have heard of this swap bone stock with a good tune putting down 270 to the wheels. Modding the head or the block will make even more power as well. Good luck to all that try this swap and i will give info on it when i finish.