1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help me with my swap

Discussion in 'HYBRID -> EG-EK / DC' started by ITR EG6, Apr 21, 2004.

  1. ITR EG6

    ITR EG6 Member

    Messages:
    32
    Likes Received:
    0
    Joined:
    Apr 21, 2004
    Hey guys, this is my first post here. I am working on swapping a b18c5 into my 94 hatch. I have the motor in and I just have a few wiring questions. First of all, I am using an obd1 LS harness. I have an obd1 alt. and injectors and I am working on getting an obd1 distributor. Am I going to need a GSR distributor, or is there something else I can use? Second, is there anything else that I am going to need to know besides about wiring the VTEC soleniod and knock sensor? Thanks for the help, I am just very confused.
     
  2. turboB20hatch

    turboB20hatch Senior Member

    Messages:
    355
    Likes Received:
    0
    Joined:
    Apr 2, 2004
    Location:
    pacific nw
    bolt the motor in and pay to have a pro wire it
     
  3. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,034
    Likes Received:
    3,961
    Joined:
    Sep 28, 2002
    Location:
    CT
    you dont need to change all of that over to OBD-1 parts

    you can simply change the plugs for the distributor, injectors, and alternator
     
Verification:
Draft saved Draft deleted

Share This Page