1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help w/camgear settings

Discussion in 'Engine Building' started by shaneb, Jan 17, 2004.

  1. shaneb

    shaneb Member

    Messages:
    69
    Likes Received:
    0
    Joined:
    Jun 11, 2003
    Would any one know how to set skunk2 stage 2 cams with stock cam gears....??

    Should i put the keys strait up or should i go off the cam gears lines??

    Right know i have them set off the cam gears line or makes, and the car seems to be fine untill i rev to about 8000 or more it lags.......... I have portflow springs and retainers...
     
  2. shaneb

    shaneb Member

    Messages:
    69
    Likes Received:
    0
    Joined:
    Jun 11, 2003
    also how can i tell what stage cams i have ?? I'm thinking maybe i might have got the stage one and not the stage 2 ,, i see a # 2 on the casting but dose that mean any thing ??
     
  3. StyleTEG

    StyleTEG Senior Member

    Messages:
    217
    Likes Received:
    0
    Joined:
    Oct 22, 2003
    With stock cam gears, you have to keep the cam timing stock. With the cam-key in, you should only be able to put the gears on at 0,0.
     
Verification:
Draft saved Draft deleted

Share This Page