help with my Axle

[hondaman85]

Ok ive been messing around with this axle on my 89 crx for weeks trying to find the correct one I bought a b16a kit that came with axles the left side bolted up fine but the right side the axle was too long and would not let the spendle bolt up so I just bought A right side axle for a 89 integra assumeing it would work but today it fit but sounds like the tranny is spining not turing the axle well its not turning the axle is there some sort of spline diffrance can I just change out the part that goes in the tranny with the one it came with?? some one please help me

 

[jason22ga]

have you tried 90-93 integra axels that what i have on my 91 hatch with a b16a

 

[hondaman85]

no because Ive read that thay dont work on some

 

[hondaman85]

but it sounds like the tranny is spinning but not conecting with the axle

 

[jbeck]

90-93 teg axles and halfshaft FTW

 

[hondaman85]

I was wandering if its a bad tranny because i put it all togather today and made sure it was all in and with nothind on it the axle will spin but if there is pressure it will stop and not start back up and the tranny sounds like its not catching the axle its a y1 tranny and the axles have 26 splines is that right?

 

[hondaman85]

so does anybody know