1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with swap

Discussion in 'HYBRID -> EG-EK / DC' started by rizq777, Aug 1, 2004.

  1. rizq777

    rizq777 Member

    Likes Received:
    Nov 9, 2003
    im doing a swap a b18b swap into my 95 hatch. i got the motor in but i was looking under the motor and saw where my motor and trans meet i can see my flywheel what am i missing cause it looks like i need a cover there or something. also what axles do i use cause i got two axles with the swap but they are both the same size i think the person gave me a wrong axle. the driverside axle should have a long shaft like the stock d series axle that i took out shouldnt it.
  2. pissedoffsol

    pissedoffsol RETIRED

    Likes Received:
    Sep 28, 2002
    Retirement Home
    probn just a missing cover- iw oudln't worry about it right away... jsut stay out of the rain and sand till you can score one.

    as for the axels, b-seirs axels are equal length, and use an intermediate shaft that bolts to the tranny.

    d-series are much different and are as you describe.

    if you're missing the intermediate shaft, any 94+ b-series one will work.
Draft saved Draft deleted

Share This Page