1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how to change harness plugs

Discussion in 'ECU's, Electronics, and Tuning' started by MarkN929RR, Feb 25, 2004.

  1. MarkN929RR

    MarkN929RR Member

    Messages:
    48
    Likes Received:
    0
    Joined:
    Feb 24, 2004
    ok need help on changing out my harness plugs from my cx to my d16y8, what tools do I need and is it hard? dont want to you know to my car so please help me!


    thanks

    mark
    p.s. if someone can walk me throug the whole thing I will buy them lunch!!

    thanks

    mark
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    simple cut/paste.

    buy a $15 soldering iron at a hardware/auto store and a spool of solder.

    cut the old harness off the obd2 harness leaving an inch or 2 of wire to work with.
    cut 1-wire at a time, off the obd1 harness, and position the obd2 harness in its stead. strip wire with wire cutters. twist tight. solder. tape. lather, repeat if desired. :)
     
Verification:
Draft saved Draft deleted

Share This Page