1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how to hold flywheel w/o the tool?

Discussion in 'Accord' started by PowerAddict, Sep 18, 2007.

  1. PowerAddict

    PowerAddict New Member

    Messages:
    40
    Likes Received:
    0
    Joined:
    May 12, 2007
    I'm trying to get the bolts out of the flywheel but I'm by myself and I can't put enough force on the wrench and the prybar at the same time.

    what can I jam in the teeth of the flywheel to keep it still?
     
  2. TurboMirage

    TurboMirage YEEAAAHHH VIP

    Messages:
    24,580
    Likes Received:
    696
    Joined:
    May 20, 2003
    Location:
    Central, MA
    nylon rope in the cylinder during the compression stroke ;)

    or, i just get a bigass bar and crank on it real quick, like high impact and they usually break loose.
     
  3. civicious

    civicious FüK-VTEC VIP

    Messages:
    9,855
    Likes Received:
    629
    Joined:
    Jun 15, 2003
    Location:
    Houston, TX
    Put 2 bolds halfway threaded into the flywheel at 9 and 6 o'clock, and use a prybar or a long screwdriver to hold the flywheel in place. Works for me every time.
     
  4. PowerAddict

    PowerAddict New Member

    Messages:
    40
    Likes Received:
    0
    Joined:
    May 12, 2007
    good suggestions guys, thanks!
     
Verification:
Draft saved Draft deleted

Share This Page