1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how to identify what head i have?

Discussion in 'Engine Building' started by 1badEF9, Aug 26, 2007.

  1. 1badEF9

    1badEF9 New Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Jul 31, 2007
    I have a d16y7 block, how can i tell what head is on car? also i believe it has a a6 intake manifold by comparing it to other pictures, it has a Si tranny with LSD and a pm6 ecu swap as well, its a 88 civic hatch, so im tryin to line out exactly what all it has before i start to do additional work
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    There's a marking in between the second and third exhaust ports on the head casting- typically "PM3" or something like that. Find that number and then look it up.
     
  3. CRX-YEM

    CRX-YEM Super Moderator Moderator VIP

    Messages:
    4,623
    Likes Received:
    54
    Joined:
    Sep 29, 2002
    Location:
    Wallingford, CT
    Being that is is a d16y7 block which is ODB2, but the PM6 ecu is obd0, I'd assume the intake and head are both from an a6 considering the a6 is intake and head etc.. is OBD0.

    so if you think about it it's a d16y7 w/ an a6 head = d16a6

    the d16a6 had a head code of PM3, as Cal stated

    the d16y7 has a head code of P2F
     
    Last edited: Aug 26, 2007
Verification:
Draft saved Draft deleted

Share This Page