1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Integra Supension on CRX

Discussion in 'Civic and CRX - EF' started by Sofast, Oct 27, 2009.

  1. Sofast

    Sofast Member

    Messages:
    85
    Likes Received:
    0
    Joined:
    Sep 14, 2009
    I have googled and searched with no luck. Can anyone tell me if the front and rear suspension from a 91 Teg will work on my 91 CRX? My friend is selling it to me so I want to utilize every part including the motor from the car to make my CRX a monster. Well at least a monster in my area.
     
  2. Sofast

    Sofast Member

    Messages:
    85
    Likes Received:
    0
    Joined:
    Sep 14, 2009
    with that swap can i swap the brakes as well?
     
  3. phyregod

    phyregod !!YTINASNI

    Messages:
    9,449
    Likes Received:
    225
    Joined:
    Jun 11, 2005
    Location:
    Central Texas
    Yup, it'll bolt right up. But.. Unless you are swapping from drum brakes to disk brakes, its pretty pointless. Teg parts are heavier. The only thing you HAVE to swap is the front spindles.. depending on what trim your crx is.
     
  4. Sofast

    Sofast Member

    Messages:
    85
    Likes Received:
    0
    Joined:
    Sep 14, 2009
    its a dx. is the trailing arms the same as well?
     
Verification:
Draft saved Draft deleted

Share This Page