1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ls/vtec gsr head got a few probs

Discussion in 'HYBRID -> ED-EF / DA' started by electric_rex, Sep 11, 2003.

  1. electric_rex

    electric_rex Junior Member

    Likes Received:
    Sep 11, 2003
    im putting an ls vtec in and i have a few problems, the car was originally a dx so i only have dual point injection. i want to run a pr4 ecu b/c for one its cheaper and i also have a vafc apexi controller to control vtec engagement anyway. i need to know if the wiring harness will plug into everything, like the distibutor, im useing the distributor from an ls motor on the gsr head. i heard it would work all i would have to do is upgradde the ignition coil.
  2. lsvtec

    lsvtec GNU/Linux Evangelist

    Likes Received:
    Sep 30, 2002
    Greater Portland, OR
    The LS distributor will not bolt to the head unless you cut off a leg. And even then it is hard to get the ignition advace setup properly. Do yourself a favor and get an OBD0 B16 Distributor.
Draft saved Draft deleted

Share This Page