1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LS/VTEC Help

Discussion in 'HYBRID -> EG-EK / DC' started by billyhoe, Oct 24, 2003.

  1. billyhoe

    billyhoe Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Oct 24, 2003
    hello all i have a 92 civic hatch with a lv/vtec. heres my problem, when i start the car it idles up to 3,500rpm then bacc down to 1,500rpm with the IAC unplugged it bounces between 1,300rpm and 1,400rpm. I tried 3 different IAC's so thats not the prob. COULD THE PROBLEM BE MY ODBI GSR UNDERDASH WIRING HARNESS MATED TO AN ODBII GSR WIRING HARNESS?
     
  2. 92civicb18b1

    92civicb18b1 The Trisexual

    Messages:
    8,859
    Likes Received:
    18
    Joined:
    Oct 1, 2003
    Location:
    The asshole of the USA, New Jersey
    IMO you should have gone with OBD1, but since you used obd2 check the wiring to make sure it's right.
     
  3. 1fast5gen

    1fast5gen Junior Member

    Messages:
    26
    Likes Received:
    0
    Joined:
    Oct 27, 2003
    Location:
    florence, ky
    what year is your motor? i have an obdI lsvtec in my 92 hatch with the gsr wiring harness and have no problems... let me know
     
  4. kaoskustoms

    kaoskustoms Senior Member

    Messages:
    550
    Likes Received:
    0
    Joined:
    Jan 6, 2003
    Location:
    casper wyoming man
    make sure that your coolant is full if not fill it up and ry again if so let me know
    kaoskustoms@yahoo.com
    :ph34r:
     
  5. lsvtec

    lsvtec GNU/Linux Evangelist

    Messages:
    5,453
    Likes Received:
    3
    Joined:
    Sep 30, 2002
    Location:
    Greater Portland, OR
    This has nothing to do with coolant level. Your wiring harness could be the problem you could also have a vaccuum leak.
     
Verification:
Draft saved Draft deleted

Share This Page