ok so i have a b18b1 bottom end with a stock 81mm bore and a b16a JDM head. i would LOVE to use my stock ls rods and pistons but i know that the weak point of the rods is the bolts. i have the option to go ARP rod bolts but then have to get the rods honed to compensate for the torque on the bolt. and the price of that is 150 from my machine shop. i also heard that the clearance on the pistons to the new heads valves is too close. so i was planning to go weisco pistons with a 9.5 -1 compression. is that too high? they are avaliable from 9- 9.6... I also was curious to what ecu setup i should run. my local tuner does not tune on hondata which is gay.. pics and more questions will be posted soon!