1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need Help.....portportiong valve, booster/master cylinder

Discussion in 'Wheels / Suspension / Tires / Brakes' started by rhettjohnson, Sep 14, 2009.

  1. rhettjohnson

    rhettjohnson New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Sep 13, 2009
    im in the process of doing a rear brake disk conversion on my 95 dx hatch and was wondering if i could use the stock proportiong valve and booster/master cylinder from my car? or do i have to swap everything from a 94 civic si, which where im getting the trailing arms an stuff from? need help......
     
  2. Battle Pope

    Battle Pope New Member

    Messages:
    10,279
    Likes Received:
    60
    Joined:
    Jun 22, 2004
    Location:
    Southern Oregon Coast
    You will need to change the proportioning valve and also the master cylinder if I recall correctly.

    It may be a good time to upgrade to an Integra master cylinder and valve which again if I recall correctly are larger and provide more substantial braking performance.
     
  3. rhettjohnson

    rhettjohnson New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Sep 13, 2009
    ok sweet but not the booster right? also if i switch to Integra prop valve and master cylinder does the car have to be W/o ABS?...
     
  4. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,017
    Likes Received:
    3,947
    Joined:
    Sep 28, 2002
    Location:
    CT
    you probably don need the booster unless the master cyl bolts up differently

    and yeah non abs
     
  5. rhettjohnson

    rhettjohnson New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Sep 13, 2009
    sweet, hey ya'll know what year of integra would i get that prop valve from 90-93 or 94-01?
     
Verification:
Draft saved Draft deleted

Share This Page