1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New and Need Help =)

Discussion in 'Accord' started by dropdead, Mar 2, 2011.

  1. dropdead

    dropdead New Member

    Messages:
    29
    Likes Received:
    4
    Joined:
    Mar 2, 2011
    Location:
    Asheville
    I am new to this site so let me introduce myself. My name is Tabatha and I drive a 96 Accord LX. It is currently a Non VTEC car but I plan on putting a VTEC head on it. I have the head ready to go but it isnt on bc I still need a few things. Is there any way I could put the VTEC head on the Non VTEC block and just not hook up VTEC atm? The Non VTEC head is bad and needs replaced asap.
     
  2. ls94civic

    ls94civic New Member

    Messages:
    256
    Likes Received:
    6
    Joined:
    Jan 25, 2011
    Location:
    vermont
    I don't see why you couldn't do it aslong it's the right head that will fit on that block!!! I'm guessing it's a 2.2 non vtec and your gonna be putting on a 2.2 vtec head ?????
     
  3. hondafreak513

    hondafreak513 New Member

    Messages:
    2,053
    Likes Received:
    46
    Joined:
    Nov 9, 2010
    Location:
    O hi O
    Yes you can and don't forget to take out the oil jet on the block.. It is between the block and head in the center and on the back part of the block...
     
  4. |Chaz|

    |Chaz| Well-Known Member VIP

    Messages:
    6,125
    Likes Received:
    253
    Joined:
    Jul 4, 2007
    Location:
    Washington
    Welcome to the site Tabatha :). Take some time to do a little bit of searching. Go and post an introduction thread in the Members lounge and include a link to this thread in the post. Good luck with your Accord :)
     
  5. dropdead

    dropdead New Member

    Messages:
    29
    Likes Received:
    4
    Joined:
    Mar 2, 2011
    Location:
    Asheville
    Thank you all for the input. It is a 2.2 vtec head btw =)

    I hope to have the car done soon bc its starting to get on my nerves!
    Haha.
     
  6. dropdead

    dropdead New Member

    Messages:
    29
    Likes Received:
    4
    Joined:
    Mar 2, 2011
    Location:
    Asheville
    Thank you all for the input. It is a 2.2 vtec head btw =)

    I hope to have the car done soon bc its starting to get on my nerves!
    Haha.
     
  7. Ethan

    Ethan Well-Known Member

    Messages:
    2,945
    Likes Received:
    98
    Joined:
    Jun 30, 2008
    Welcome to HS Tabatha! Good luck with your build!
     
  8. hondasaurus

    hondasaurus Member

    Messages:
    603
    Likes Received:
    12
    Joined:
    Nov 20, 2008
    Location:
    VA/DC
    it's called a mini-me
     
Verification:
Draft saved Draft deleted

Share This Page