1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd1 to obd2 alternator conversion

Discussion in 'HYBRID -> EG-EK / DC' started by SixtySecondAssassin, Dec 24, 2003.

  1. SixtySecondAssassin

    SixtySecondAssassin Senior Member

    Messages:
    1,071
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    Austin, TX
    anyone know the pinouts of the two alternators?

    we're trying to use an obd2 alternator in an obd1 car
     
  2. Johnnylawless

    Johnnylawless Senior Member

    Messages:
    227
    Likes Received:
    0
    Joined:
    Jul 14, 2003
    Is it an OBD2 swap? if so what i did was get a 93 gsr alternator as that has the OBD2 type mount and OBD1 plug. my swap was 00 ITR into 95 civic coupe.
    hope this helps,JIM
     
  3. civicious

    civicious FüK-VTEC VIP

    Messages:
    9,855
    Likes Received:
    629
    Joined:
    Jun 15, 2003
    Location:
    Houston, TX
    all b-series alternators mount to the block the same.

    obd0 alternators had a round plug...

    im not positive, but i thoght that obd1 and obd2 plugs were the same....
     
  4. Johnnylawless

    Johnnylawless Senior Member

    Messages:
    227
    Likes Received:
    0
    Joined:
    Jul 14, 2003
    OBD1 and OBD2 plugs are not the same I ran into that same problem.
    but the 93 GSR alternator has an OBD1 plug and it will mount to any B series engine.

    Lates,JIM
     
Verification:
Draft saved Draft deleted

Share This Page