1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd1 to obd2

Discussion in 'HYBRID -> EG-EK / DC' started by Vtec Andy....., Apr 28, 2004.

  1. Vtec Andy.....

    Vtec Andy..... Senior Member

    Messages:
    189
    Likes Received:
    0
    Joined:
    Sep 30, 2003
    i have a b18c gsr in my 92 civic hatchback, but im going to trade for a 99 type r motor , my question is the engine harnesses the same? or to i have to swap harnesses the 95 gsr harness to the 99 type r harnes sand throw the 99 harness on the gsr... :blink:


    let me know the deal..

    THanks andrew
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,969
    Joined:
    Sep 28, 2002
    Location:
    CT
    the plugs for the distributor, injectors, and alternator are different between OBD-1 and OBD-2

    if the 99 ITR engine is USDM then i would just use its harness... it will plug right into your car

    (and as for throwing the ITR harness onto the GSR engine... the ITR harness does not have any wiring for the secondary butterflys... so it will require some wiring)
     
Verification:
Draft saved Draft deleted

Share This Page