1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd2 b18c-engine--obd1 95 integra

Discussion in 'General Tech and Maintenance' started by shawnbecker, Mar 6, 2006.

  1. shawnbecker

    shawnbecker Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Mar 6, 2006
    i have a 95 integra and i am swapin a b18c engine in it but it is obd2 my car is obd1 i know i need to swap out my old injecters into the new motor but what other parts need to be changed and how many parts can i take out of my old motor it is a b18b1
    thanks
    shawn
     
  2. dok

    dok Senior Member

    Messages:
    728
    Likes Received:
    1
    Joined:
    Mar 20, 2003
    man all you have to do is pull your swap out unplug wire connecters take the the ls the b18b1 tranny if your b18c didn't come with one slap that on take all the take all the plugs from the b18b1 put them on the the b18c no need to take any injectors from any motor if you do that your car will run slower. trow your new swap in plug the wires and run vtec wires there 4 wires you need to run one is ground 2 are vtecs and one is a knock senor and run them to the ecu oh you do need a new ecu if its a gsr like i think itis you will need a p72 obd1 if you need more info pm me
     
  3. shawnbecker

    shawnbecker Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Mar 6, 2006
Verification:
Draft saved Draft deleted

Share This Page