obd2 b18c1 into obd1 non vtec swap

[crxpower24]

Ok so i know im in the wrong area but it won't let me post on the swap.

Ok so im looking to buy a b18c1 swap for my 95 Civic dx but recently i only find obd2 engines and it seems that's the 1 im get so my question is do all the plugs in the engine bay match i know that you have to wire vtec knock sensor and some other staff i know that in the engine bay plugs 1 dont fit from the obd2 in to the obd1 that does affect every thing

 

[E_SolSi]

injector plugs are different
alternator plug is different
distributor plug is different

all other plugs are the same

 

[crxpower24]

Do they sell a jumper harness for that or its just rewiring every thing

 

[E_SolSi]

i rewired mine

rywire makes adapters
Rywire : OBD1 to OBD2 10-pin Distributor Adapter - $35.00
Rywire : OBD1 harness to OBD2 Injector adapters - $60.00
Rywire : OBD0 & OBD1 chassis to OBD2 Alternator Adapter - $35.00

 

[crxpower24]

Thats all i need to put in a obd2 in a obd1

 

[E_SolSi]

other than the wiring for VTEC, VTEC Oil Pressure, Knock Sensor and IABs http://www.rywire.com/catalog/obd1-obd2-vtec-subharness-p-18.html
and lengthening a few wires
(you already mentioned those so i didnt bother listing them)
that should be about it