1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OBD2 gauge cluster for OBD1 ECU

Discussion in 'HYBRID -> EG-EK / DC' started by Nick7, Nov 24, 2004.

  1. Nick7

    Nick7 Member

    Messages:
    37
    Likes Received:
    0
    Joined:
    Jul 25, 2003
    OK, I just got B16A2 (OBD1) engine put into my Civic Hatchback '97 (was OBD2). I had to use all wiring from OBD1, since one I had was not good (I had 2 connectors to ECU, fired injectors in pairs, etc, etc.. - European model, D14A4 engine).

    Anyway, what I wanted to ask - I just noticed that for tachometar it states in service manuals that for year 96-98 200 pulses per minute are equal to 100rpm, while for 92-95 it says 250 pulses are equal to 100rpm!
    So, I guess due to this I'll have wrong reading of tacho?
    Anyone had this issue?
     
  2. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    I guess it's possible your tach will translate it wrong.
     
  3. Nick7

    Nick7 Member

    Messages:
    37
    Likes Received:
    0
    Joined:
    Jul 25, 2003


    Well, tach works.. does it show wrong readings? Dunno yet.. I only did rewiring to see if it works. Still have lots of rewiring left, and unfortunately can't do anything 'till next weekend.. will see than how ti works B)
     
  4. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Well I imagine it works, but when you start hybrding different generations, and their electronics things can get silly.
     
Verification:
Draft saved Draft deleted

Share This Page