1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OBD2-OBD1 conversion question

Discussion in 'HYBRID -> EG-EK / DC' started by BertMcGert, Sep 3, 2007.

  1. BertMcGert

    BertMcGert New Member

    Messages:
    42
    Likes Received:
    0
    Joined:
    Aug 21, 2006
    Location:
    middle of nowhere, oregon
    So I think when i do my b18 swap im going to use an rywire comversion jumper to go to obd1 in my 96 hatch. My question is can i still use my snap on scanner to pull ecu codes from the data port or do i have to use a jumper to pull the codes?
     
  2. formby

    formby learning in progress

    Messages:
    5,735
    Likes Received:
    23
    Joined:
    Feb 19, 2003
    i can go to auto zone and find out.

    i have an obd1 jumper harness on my 99dx

    i might be passing by tonight.... maybe not

    ilyk
     
Verification:
Draft saved Draft deleted

Share This Page