1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ODB0 Engine with ODB1 Harness ECU

Discussion in 'ECU's, Electronics, and Tuning' started by autox19, Sep 12, 2011.

  1. autox19

    autox19 Member

    Messages:
    56
    Likes Received:
    1
    Joined:
    Feb 25, 2010
    Location:
    Lansnig, Michigan
    Is this possible? what do I have to change? the Engine already has the ODB1 Dizzy. Basically, I am putting this into a non-honda and the donor car's wiring is pretty rigged. I found a complete odb1 harness and was thinking this could be the easier route. thoughts? Odie
     
  2. autox19

    autox19 Member

    Messages:
    56
    Likes Received:
    1
    Joined:
    Feb 25, 2010
    Location:
    Lansnig, Michigan
    nevermind. going to try to do the impossible and just do my own wiring. just follow pinout, to engine. taking another look at a "real" harness, there are too many things I dont need. I just need the requirements for the engine to run, no charging, no headlights, wipers radio etc... Odie
     
Verification:
Draft saved Draft deleted

Share This Page