1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Q Bout D Series Mix And Match

Discussion in 'HYBRID -> EG-EK / DC' started by mini1.6i, Apr 27, 2003.

  1. mini1.6i

    mini1.6i Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Apr 27, 2003
    just wonderin will the d16a1,a3,a8/9 head can bolt on the d15b7 block or other sohc d seies block...
     
  2. MaaseyRacer

    MaaseyRacer Senior Member

    Messages:
    2,980
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    San Francisco, Ca.
    uh most of those will not becuase they are DOHC if you want d series heads, i would look at the d16z6 or d16y8...
     
  3. solblu

    solblu Senior Member

    Messages:
    378
    Likes Received:
    0
    Joined:
    Jan 17, 2003
    Location:
    Ricer
    Well I'm sure you can find someone who has, but not easily or cheaply. Get a Z6 head, flows better than Y8, or an A6 head and a good cam for it. (since you have the B7 you could just get a cam from delta cams and a Y8 IM the A6 valve train is a little better than your B7, but the head is the same otherwise)
     
  4. mini1.6i

    mini1.6i Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Apr 27, 2003
    so no way i can made it coz someone told me i can redrill i hole @ the dohc d series head and they will fit no problem.....
     
Verification:
Draft saved Draft deleted

Share This Page