1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

searched and search with no luck anyone out there know anything???

Discussion in 'Body / Exterior / Interior / Cosmetics' started by SavageDreams, Dec 5, 2006.

  1. SavageDreams

    SavageDreams Savage Reins Supreme

    Messages:
    67
    Likes Received:
    0
    Joined:
    Oct 23, 2006
    Location:
    Taft,Ca,93268
    ok I know I have seen pics and people asking how to do it but I have not found a how to
    so does anyone know where I can find or have a how-to install a 90-93 integra dash into a 88-91 civic???

    please help I have a complete dash sitting in my garage and I am trying to figure out what needs to be done and any help would be helpful
     
  2. K2e2vin

    K2e2vin Senior Member

    Messages:
    8,446
    Likes Received:
    92
    Joined:
    Jan 2, 2003
    Location:
    Raleigh, NC
    I haven't seen an 90-93 on installed; but look for the wiring diagrams. I've seen them for 88-89 and 90-91 civics, but haven't seen any for the integras.
     
  3. SavageDreams

    SavageDreams Savage Reins Supreme

    Messages:
    67
    Likes Received:
    0
    Joined:
    Oct 23, 2006
    Location:
    Taft,Ca,93268

    well I actually have it in the car but I need to get some idea's hon how to mount the sides cuz they dont line up and I have the drivers side integra door panel partially in my hatch I just need to make a good window crank and then its done.I already have the civic dash wiring harness wired into the integra dash and integra gauge cluster.it does look very nice and I have seen a 90-93 integra dash installed but it was not completely done.here is some pics of the one I saw

    http://img.photobucket.com/albums/v608/thesilentchamber/integradash2.jpg

    http://img.photobucket.com/[FONT=verdana, arial, sans-serif][FONT=verdana, arial, sans-serif]albums[/FONT][/FONT]/v608/thesilentchamber/integradash.jpg

    and I am going to go take pics of what mine looks like inside

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Dec 5, 2006
  4. K2e2vin

    K2e2vin Senior Member

    Messages:
    8,446
    Likes Received:
    92
    Joined:
    Jan 2, 2003
    Location:
    Raleigh, NC
    That's complete integra dash, so no issue with hood. I'd say 90-91 Si gauge hood trimmed might work.
     
  5. SavageDreams

    SavageDreams Savage Reins Supreme

    Messages:
    67
    Likes Received:
    0
    Joined:
    Oct 23, 2006
    Location:
    Taft,Ca,93268

    yeah I have a complete 90 integra and pulled everything that will bolt on to a 88-91 civic with no problem or almost no major probs.
    so far to get the dash to work I have removed the heater vents from under the dash the ones for the windshield defrost but I am making them thinner so they will fit in and all I have to do now is mount the sides which I am in the process of doing that.
    the dash is deffinitly worth the trouble as long as you swap in the the integra door panels too other wise the civic door panels have to be removed
     
Verification:
Draft saved Draft deleted

Share This Page